Page 1 of 1
GQ steering wheel
Posted: Sat Aug 05, 2006 3:50 pm
by dwaynes
Just a big thanks to all for the info on the pulsar steering wheel option as i just fitted a n13 SSS pulsar straight on no need for any mods at all.
Oh and as little as $45. Bargin me thinks.
http://putfile.com/pic.php?pic=main/8/2 ... .jpg&s=f10
Posted: Sat Aug 05, 2006 4:43 pm
by BigMav
Nice. I just asked for one at a wrecker here in brissy, $85. I don't think so champ.
Posted: Sat Aug 05, 2006 5:20 pm
by mtb_man
Nice work, the SSS wheel looks better than the standard N13 wheel that I'm using. The SSS wheel looks nice and fat, unlike the skinny standard one.
Posted: Fri Nov 24, 2006 11:01 pm
by GUJohnno
Can you still read the speedo OK with that wheel on?
Posted: Sat Nov 25, 2006 7:43 am
by dwaynes
yeah have had no problems at all
to tell the truth i have never thought about it as i found nothing that i need to be blocked from view
Posted: Sat Nov 25, 2006 10:43 am
by revn211
my bro had a spare 180sx steering wheel lying around so i fitted it to my GQ i will post pics tonight, it feels much easier to drive with a smaller fatter wheel
Posted: Sat Nov 25, 2006 1:05 pm
by badger
does anyone know of any other wheels that are closer to the size of a gq wheel that fit?
Posted: Sat Nov 25, 2006 2:12 pm
by 4wdnut
my dad used to have a woodgrain one in his old GQ. the ones you buy at autobarn etc. much better than a GQ steering wheel.
Posted: Sun Nov 26, 2006 9:44 am
by jigga
do all N13,14 and 15 wheels bolt straight on?
Posted: Tue Nov 28, 2006 11:48 pm
by slacker
Did you have any trouble hooking up the horn?
Posted: Wed Nov 29, 2006 6:56 am
by dwaynes
none whats so ever just attached plug from steering wheel back to existing connector.
Posted: Wed Nov 29, 2006 7:55 am
by MrMaxi
It's a complete swap over with no conversion, much better than the truck steering wheel that came standard.
Posted: Wed Nov 29, 2006 9:33 am
by turps
slacker wrote:Did you have any trouble hooking up the horn?
If the horn dosent work. Just undo the screws that hold that part onto the pulsar wheel. Then with the screw driver still on the screw(theres 3) give them all a small wack with your hand. That will get it closure to the brass button on the steering coloum.
These three screews only hold the plastic not the actuall wheel so loosening them has no safty problems. As the wheel only needs the center nut..
Posted: Wed Nov 29, 2006 4:35 pm
by sickgq
i got a modified steer wheel on my car check my pic
Posted: Wed Nov 29, 2006 6:49 pm
by embryo
thats nice, can we see the steering wheel?
Posted: Thu Nov 30, 2006 10:44 pm
by slacker
cheers guys, now i have to find a replacement.
Posted: Thu Nov 30, 2006 11:13 pm
by Patchy
would the same work on an mk???? or am i doomed for eturnity for beeing piss poor?
