Page 1 of 1
Patrol TB42>TD42 Question. Need Help!!!
Posted: Fri Oct 10, 2003 11:19 am
by swbpatrol
Gooda
Im currently pulling my TB42 to replace it with a TD42. I understand
the gearbox will bolt up but i need to tap a third hole for the
starter motor but what i need to know will the clutch i have on my
TD42 still be used in the TB42 Bellhousing????? Also should i get an
auto sparky to fix the current wiring or should i get a whole TD42
wiring harness???
Chris
[/b]
Re: Patrol TB42>TD42 Question. Need Help!!!
Posted: Fri Oct 10, 2003 11:27 am
by bogged
swbpatrol wrote: Im currently pulling my TB42 to replace it with a TD42. I understand the gearbox will bolt up but i need to tap a third hole for the starter motor but what i need to know will the clutch i have on my
TD42 still be used in the TB42 Bellhousing????? Also should i get an
auto sparky to fix the current wiring or should i get a whole TD42
wiring harness???
Chris
Why not replace the clutch while your at it? its this far apart...
Autosparks are not cheap, then again wiring from wrecker maynot be either. Call both and get prices, this may sway you one way or the other.
What you doing with your TB42? is it fubar, mates lookin for 1.
Posted: Fri Oct 10, 2003 12:36 pm
by swbpatrol
The clutch is really good on the TD42 like new! so im planning to use that. If you are interested in the TB42 reply back its in excelent nick and will come with everything like starter motor, alternator, extractors and is still in the car for a while so u can do any tests to it. Not sure what to do with the wiring want to make it as reliable as possible but i have an autosparky mate who will do it cheap but i reackon it might be better to get it all changed to diesel wiring?????????