Page 1 of 1
tappits on 2LT surf motor
Posted: Wed Aug 09, 2006 7:31 pm
by poo_trol
can anyone tell me if the 2LT surf motor
has hydrolic or adjustable tappits
any info would be good on this motor
Posted: Wed Aug 09, 2006 7:32 pm
by Dzltec
they are a shim adjustable valve clearance.
tappets
Posted: Wed Aug 09, 2006 7:33 pm
by LuxyBoy
Probably uses shims like the 3L but i am not completely sure.
Posted: Wed Aug 09, 2006 7:47 pm
by poo_trol
thanks guys
have to try to adjust a mates on the weekend will let you know how we go
Posted: Wed Aug 09, 2006 8:20 pm
by NiftyNev
Probably shims unless it is an older model with roller rockers.
Nev
Posted: Wed Aug 09, 2006 9:26 pm
by tweak'e
NiftyNev wrote:Probably shims unless it is an older model with roller rockers.
Nev
i thought it was only the older 2L that had rollers not the 2LT ??
Posted: Thu Aug 10, 2006 8:38 pm
by NiftyNev
tweak'e wrote:NiftyNev wrote:Probably shims unless it is an older model with roller rockers.
Nev
i thought it was only the older 2L that had rollers not the 2LT ??
As far as I know there are two versions of the 2L-T the latter usually refered to as a 2L-T11 (2). There is two rocker covers, an alloy and a pressed steel. The alloy cover should have rollers and the pressed steel buckets and shims.
Here is a thread on the Surf forum that seems to support this.
http://toyotasurf.asn.au/forum/viewtopi ... er+rockers
Nev
Posted: Sat Aug 12, 2006 6:39 pm
by Dzltec
You are correct nev, my mistake. Alloy rocker cover has adjustable rockers, steel has shims, sorry for the mix up.