Outer Limits 4x4 Board

does any one have any info as to fit the 60 series diff to the middys chassis the 60 series diff are 3inches wider then the middys original diffs... need to know what i have to look at and modify to make the diffs fit.... what i do know is the the middys chassis width above the front diff is 720mm and the 60 series chassis width above the front diff is 800mm

BJ i need your help to as you made em fit under you yellow POS... come on be a MAAAAAAATE and help a fellow toyota lad out

jake did you find out if they will fit. sounds like it would be a great mod. let me know how you go. i might give it a go. or if you do and wanna get rid of the diff lock let me know. and did you get around to turboing you middy

Ruggers wrote:jake did you find out if they will fit. sounds like it would be a great mod. let me know how you go. i might give it a go. or if you do and wanna get rid of the diff lock let me know. and did you get around to turboing you middy

havent gotton round to puttin the turbo on yet will be a couple of months as the fun coupons dont perfmit as yet .... sorry mate wont be gettin rid of the locker pretty sure these are gonna fit as they fitted under robs 40 series POS and his chassis is 20mm narrower then mine(ours)

hey jake have you measured the 60 series diffs and 73 series as according the arb catalog for diff locks they are the same diff

measured them up last week they are gonna fit but have been told to try and find out weather 60series leafs fit to and they do but only just as the rears shift the rear diff back 25mm so im gonna take to a mates work shop and play abit one week end........ awwe yeah ruggers forgot to tell you that the 60 serries diff locka is the same as the 73 and 75 series mines a 60 series locker it came from bjs big yellow rig

yeah

picture

oh yeah, these pics showed the u-bolt flip at the same time gives 18mm more clearance, by Denis in France!

a picture tells a thousand words so im not answering any questions on this at all ANY!

WTF .... BJ i woodnt be able to get that engineered in a thousand years where the pics of YOUR SETUP... you told me you were gonna get you slack arsed pimpin BIATCH : armsup:

Jake,

Have you got the 60 diffs in yet? Can you let us know how you go with it.

I wanna spoa my middy but reckon it needs a wider track. 60 or 80's diffs were what i was thinking.

Any advice?

Cheers,
Ben

Trusa wrote:Jake,

Have you got the 60 diffs in yet? Can you let us know how you go with it.

I wanna spoa my middy but reckon it needs a wider track. 60 or 80's diffs were what i was thinking.

Any advice?

Cheers,
Ben

yeah mate i got a pair of 60 series diffs picked em up for $100 ben this is a long term project so the diffs unfortunately wont be goin in till next year some time.... trust me ben i will let every one on this forum know what is happenen with the middy as soon as i get started

with spoa the problem is that you will deffinately have to go wider but i dont recon 80 series diffs are the go as they might be to wide... is this gonna be done to your daily driver? 60 series diffs are the go as they are 3.5 inches wider and you can then put a bigger (positive) offset on you rims and if you wanna street it you just have to thro a set of negative offset rims like the ones that come standard on a GU POOTROL or 80 series

awwe by the way ive added you to my msn messenger list so if ya wanna chat drop us a line

What did you get for $100 Jake? The complete wheel to wheel axle assemblies? Sounds like a real bargain!!!

i picked up diff casing, centres, axels, and hubs

JAKE wrote:i picked up diff casing, centres, axels, and hubs

where from?? Crazy Cruiser?

narh locally mate