Stock body blocks
Posted: Sun Aug 13, 2006 3:14 pm
What would be a good donor for some stock body<->chassis blocks that are say an inch to an inch and a half tall?
I am putting a G60 back together and the standard body mount "pads" are only about 10mm thick, I figure I can get a bit of body lift if I use blocks from something else that is built with more of a gap.
50-60mm diameter would work, 60mm-a-side square would be even more like the originals. Just wondering if a lux or something comes with such blocks standard. I don't want mega lift, but I figure I might as well put it back together a little bit taller.
I am putting a G60 back together and the standard body mount "pads" are only about 10mm thick, I figure I can get a bit of body lift if I use blocks from something else that is built with more of a gap.
50-60mm diameter would work, 60mm-a-side square would be even more like the originals. Just wondering if a lux or something comes with such blocks standard. I don't want mega lift, but I figure I might as well put it back together a little bit taller.