engine conversion wiring
Posted: Sun Aug 13, 2006 7:40 pm
the engine is a 5ltr VN and im pondering as to how i should setup the switches for startup, whether i should run a; accessories, run and then a push start.
or if i should run b; fuel pump, ignition, accessories, etc. then push start.
which would be the easiest for a sparky to setup from scratch as the car has not one wire but i have the whole VN to rip appart.
any problems would be appreciated too
thanx
Evan
or if i should run b; fuel pump, ignition, accessories, etc. then push start.
which would be the easiest for a sparky to setup from scratch as the car has not one wire but i have the whole VN to rip appart.
any problems would be appreciated too
thanx
Evan