Outer Limits 4x4 Board

While searching the Denco site, I saw this (last time was CAV filter, which I was lookin for )

Special for AUGUST 2006

*NOW AVAILABLE* 3'' CAST DUMP PIPE TO SUIT FACTORY TURBO NISSAN

Image is MASSIVE, click link
http://www.dencodiesel.com/special.asp


FOR THE LOW PRICE OF $165.

CALL US TODAY!
Ph: 0269254348

my wife will be down there next week. If anyone wants anythiing from there i/she can bring it here to sydney ( fairfield) and you can pick it up from here.

AS long as its paiD for so we dont have to fork any money over .


cheers

I'm thinking that's a pretty good price.

What do they normally retail for?

That price sounds pretty good..... i was quoted $1250.00 few a full 3inch exhaust system, fitted and tuned , but if you could buy the dump pipe and the exhaust seperately you might get away with it for ,,, MAYBE AROUND $ 600..

Well worth it.I bput one on mine ages ago, makes a litlle bit of difference.

sunny jim wrote:That price sounds pretty good..... i was quoted $1250.00 few a full 3inch exhaust system, fitted and tuned , but if you could buy the dump pipe and the exhaust seperately you might get away with it for ,,, MAYBE AROUND $ 600..

beaudesert exhausts will do a complete 3inc INC Dump for $900 delivered from Qld to Melb , well they would the other week when I called.

The MTQ one measures 2 1/4", and isnt really 3", and we make our own bigger radius because of this.

We also do 3" mandrel bent, with straight muffler, using all factory hanging points for $850, with dump pipe, as part of our power upgrade.

what turbo is this to suit ? any chance of it fitting a SD33T factory setup. i emailed em and they said they dunno.


i'll be getting a few few fuel filters from em next week, so maybe i can add to the order.

cheers

pongo wrote:what turbo is this to suit ? any chance of it fitting a SD33T factory setup. i emailed em and they said they dunno.


i'll be getting a few few fuel filters from em next week, so maybe i can add to the order.

cheers

it is for the 4.2 I emailed them

anything to stop you using one of these on an aftermarket kit? as long as you were running a T25/28 turbo.

http://cgi.ebay.com/ebaymotors/89-98-Ni ... 0022642937

been lookin into this again today. 3inch front to rear and dump pipe.

first place near work Trufit on Warrigul Rd $700 inc hand made dump with 2 muff

second place (boundary and white st behind servo) "not interested"

3rd place $750 with 1 muffler we make dump, or $500 you supply dump

ATS in Geelong - $750 (Im pretty sure was drivin at time) 3in dump, and 3in zaust. Just a hassle to get to...

MTQ - $900 for exhaust and dumpor $240 for dump

Beaudesert - $870 exhaust and dump + $80 shipping + $50 handling and packing - complete system If I buy 5 or more complete systems, they will take $20 off the price of each fuckin geneous of them.

Going to try some place in Lilydale that was mentioned and more from white pages.

bogged wrote: Beaudesert - $870 exhaust and dump + $80 shipping + $50 handling and packing - complete system If I buy 5 or more complete systems, they will take $20 off the price of each ***** geneous of them.

LOL

bogged wrote:
ATS in Geelong - $750 (Im pretty sure was drivin at time) 3in dump, and 3in zaust. Just a hassle to get to...

Geelong only a short ferry ride from your side of town.

turps wrote:

bogged wrote:
ATS in Geelong - $750 (Im pretty sure was drivin at time) 3in dump, and 3in zaust. Just a hassle to get to...

Geelong only a short ferry ride from your side of town.

Priced ferry the other week when came back from the Ocean Road. 2 people,car and trailer ~$90 wanted to do it as a treat for Cammo, but at that price, I put up with 290382039820398203984 cars comin back from holidays

Hey bogged give this place a call they may be able to help and i have used them a few times in the past.

TIDD BROS. EXHAUST
90 Hudson Road, Spotswood
(03) 9391 4277


They are not far from me so i could possibly pick up if needed.

Jimmy

Bogged. Do you still have a Schwitzer turbo on TD42? If so can you give me the number and type. I still have notion to buy all the kit except the snail and exhaust as I could maybe get those parts here in uk.

The Vat etc is crippling from Oz to UK. Schwitzer are available here as they are on Renuilt trucks. The only snag would be if the turbo had been modified from standard by Denco.

They have been helpful and I dont like to keep pestering them as they may think I`m trying to copy their stuff or something.
Cheers Alex

lexi wrote:Bogged. Do you still have a Schwitzer turbo on TD42? If so can you give me the number and type. I still have notion to buy all the kit except the snail and exhaust as I could maybe get those parts here in uk.

The Vat etc is crippling from Oz to UK. Schwitzer are available here as they are on Renuilt trucks. The only snag would be if the turbo had been modified from standard by Denco.

They have been helpful and I dont like to keep pestering them as they may think I`m trying to copy their stuff or something.
Cheers Alex

Na, GUJOHNNO has it now, you could message him, or failing that, email Denco...
Couldnt ship it to a mate in a neighbouring country, and then pick up from him on a weekend? Just thinkin out loud how to bypass VAT

Thanks anyway mate. If you are coming to UK for a Walkabout.you can bring it on luggage . I will put you up for a few weeks

It`s not just the Vat... Import duty and a hefty charge for Post Office delivering through customs is the killer. Also the 700$ to Denco for post.
I`ll keep thinking of a way

Alex