Outer Limits 4x4 Board

Do any of these do air hoses? I want to get the clip on the end of the hose that came with the Blue Tongue compressor replaced with a screw on fitting.

I know for a fact Enzed can help you and can only assume Pirtek can too but have not used them before.

Not sure about Enzed, but I went to Pirtek about 18 months ago, and they told me they don't do air fittings. Might have changed though...

The enzed I use in Bris did them when I went in for some a couple of monts ago. Best call ahead before you waste fuel.

Emo wrote:Do any of these do air hoses? I want to get the clip on the end of the hose that came with the Blue Tongue compressor replaced with a screw on fitting.

you should be right with either, parker/enzed here in brisbane I find a bit better value than pirtek - call ahead

Tom

if not gasweld or repco may be able to help depending on the type of fitings

Emo, no dramas with either. Ive used both, with Enzed being more expensive, but you can also try those small bolt places around Dandy, Bayswater, Moorabbin etc.

You will pay a bit more for Enzed but the service you get will make it worth while.
Use Enzed PushLoc hose and fittings, great stuff and no hose clamps.