Outer Limits 4x4 Board

Brakes on a 1999 100 series (petrol) slip just before stopping. Brakes work normally but at the last second just before completely stopping it releases or lunges forward. But always pulls up. Pads and rotors are in good condition. Any ideas? What should I look for? Could it be the proportional valve?

not likely the proportioning valve, do you have abs? this may be causing your brakes to release slightly.

I vaguely remember something at a training night for work about 100 series cruisers having a dot 5 brake fluid (silicon based) not like your dot 3.4. apparently it stuffs the brake components - might be something to look at. or see your dealer.

Thanks guys yes the car has abs its a GXL did cross my mind know little about it. It could also be a good time to change the fluid will try that today.

Could just be gas build-up under the pad, is it an auto?

Thanks playdoh it is a auto. Gas build-up what is that how would i fix it?