Outer Limits 4x4 Board

Can anyone tell me if there is a Part time setup for a D1?

I fitted one to my 80ser and found it to be the best thing I ever did, as I got rid of the backlash in the drive line and improved fuel economy (not to mention it was a whole lot more fun in the mud!). I found a post that said some one thinking about doing it but gave no more info than that.

Bruce

i have 1 in my disco 1 it was 400 from 4wd systems works great but recomend replacing all shift bushes at the same time cost me 3.50 for the 4 bushes from all4x4 this is for the lt230 transfer case but tbhey canoot supply free wheeling hubs though you would have to find they yourself maybe modify something off anothe vehicle it didnt worry me as i have gq diffs

Yes, they are made by AVM. They replace the center diff with a spool and add free wheeling hubs.

http://www.avm.com.br/products4.htm

If you can not find them in Aussyland, try Ashcroft in Pommyland.

ARB sell the part-time 4wd kit to suit the LT230 complete with free wheeling hubs for under $300.They're made by AVM.

Thanks guys I will look at all those options and see what I come up with sounds cheep through the Cruiser cost me $650 from 4wdsystems about 5 years ago.

Bruce

Any one know if a kit exists for an LT95?