Page 1 of 1
PART NUMBER FOR GAS MIXER FOR GQ 4.2LTR PETROL
Posted: Sun Aug 27, 2006 10:46 am
by bucketofbolts
as above, im after the part number for the gas mixer for a GQ 4.2ltr patrol,
Re: PART NUMBER FOR GAS MIXER FOR GQ 4.2LTR PETROL
Posted: Sun Aug 27, 2006 11:37 am
by GQPatrol V8
bucketofbolts wrote:as above, im after the part number for the gas mixer for a GQ 4.2ltr patrol,
What type of system ? American or Euro ?
I used to run an Impco 300A on my 4.2 TB42 before I changed to a V8.
Shane
gas
Posted: Sun Aug 27, 2006 12:03 pm
by bucketofbolts
thats what i was after, putting together gas set up, and just wanted to know what people where using, thanks
Posted: Sun Aug 27, 2006 6:19 pm
by hottiemonster
yeah i think you will find that alot of people with a standard TB42 will be running a 300A impco unit, like me
Posted: Sun Aug 27, 2006 6:24 pm
by Shorty40
Replied to your PM, but then I saw this thread.
I am running an OMVL R90/E.
If it makes any difference , it is on an EFI TB42
Cheers
gas
Posted: Sun Aug 27, 2006 6:45 pm
by bucketofbolts
yeah, thanks shorty40, not sure if there is a difference, i thinking there would be, the 300A looks like it would bolt straight on
gas
Posted: Sun Aug 27, 2006 7:51 pm
by bucketofbolts
does the 300A fit straight on
Re: gas
Posted: Sun Aug 27, 2006 9:22 pm
by GQPatrol V8
bucketofbolts wrote:does the 300A fit straight on
No the 300A bolts to an alloy adapter that sits on top of the carby and screws to the centre stud of the carby. The 300A then uses 3 screws to attach to the adapter
Any gas place should be able to get you the adapter for the 300A
Shane
gas
Posted: Sun Aug 27, 2006 9:28 pm
by bucketofbolts
cool, all this is new to me, thanks for your help
Posted: Sun Aug 27, 2006 9:56 pm
by N*A*M
ive got a 300a on a tb42. but since i only run gas, is there anyway to reduce the complexity of the set up? the air filter sits really high and im sure i don't need every single component there. who's running a really simple straight gas set up?
Posted: Sun Aug 27, 2006 10:15 pm
by pcman
ive made my own straight lpg setup using a ed falcon throttle body and a impco 300a mixer on my 2f landcruiser
i just made an adapter plate from 3mm steel that bolts to the standard manifold then to the falcon throttle body
then just use the rubber joiner and wack the 300a straight ontop
works a treat nice and simply can also use impco 225 or 200
sorry no pics digicam is on holidays used to have pics in my members thread but there gone now
gas
Posted: Mon Aug 28, 2006 11:34 am
by bucketofbolts
has anyone got a diagram or fitting instuctions, i want to fit it in the back of the car, and get it all tested, just to save on dollars, they want $1200 just to fit a kit
gas
Posted: Mon Aug 28, 2006 9:47 pm
by bucketofbolts
got the mixer just gotta get the rest,