snorkel for a NK
Posted: Mon Aug 28, 2006 10:39 pm
Does anyone know the the model number for the AIRTEC snorkel for the 3.5L NK? Finding it hard to get hold of!!
All help is much appreciated.
All help is much appreciated.
Page 1 of 1
link
Posted: Tue Aug 29, 2006 2:36 pm
check this out http://cgi.ebay.com.au/ws/eBayISAPI.dll ... %3AIT&rd=1
Posted: Wed Aug 30, 2006 10:02 pm
My air box is closer to the headlight/blinker than that? would this be a problem??
Thanks for your help.
Thanks for your help.
snorkel
Posted: Wed Aug 30, 2006 10:33 pm
hey wattorator,
yeh the aiirbox is definitely down further and iv seen snorkels that run down to that position, im not quite sure, but i would say that running a NH / NJ snorkel would be fine, dont just do it cos i said cos i dont have one,
i made my own, but i dont know why that ones so short, iv seen most of them have the longer ones down towards the headlight, something like a safari is going to cost about $500 and an airtec about $300, and mine, about $100
dean
yeh the aiirbox is definitely down further and iv seen snorkels that run down to that position, im not quite sure, but i would say that running a NH / NJ snorkel would be fine, dont just do it cos i said cos i dont have one,
i made my own, but i dont know why that ones so short, iv seen most of them have the longer ones down towards the headlight, something like a safari is going to cost about $500 and an airtec about $300, and mine, about $100
dean
Posted: Thu Aug 31, 2006 6:09 am
Looks like an 80 series LandCruiser one. They also fit Pajero's but don't run down the guard as far. Requires ducting inside the guard and removal of the headlamp squirters if you have them.
Posted: Thu Aug 31, 2006 12:20 pm
Thanks everyone for the help. I have just found a place that does the air flow one and it will fit no probs.