Page 1 of 1

Help - 03 sr5 lux blowing transfer seals- need FW hubs

Posted: Thu Aug 31, 2006 1:04 pm
by GBC
I'm running an auto locker and ADD which means the front propshaft is continually spinning and apparently builds enough pressure to blow seals???

I'm keen to get f.w. hubs to prevent this.

Apparently there are two types - anyone know which one will suit mine?


Cheers in advance

C.J.

Posted: Thu Aug 31, 2006 1:16 pm
by Hales231271
Get the free wheeling hubs from a poverty pack Hilux of the same year/model.
Bolt straight on.
I think they are 28 spline.
Haven't heard of different types from 97-04 model

Cheers
Dazza

Posted: Thu Aug 31, 2006 1:19 pm
by GBC
Thanks Dazza - will ring around the wreckers

Posted: Thu Aug 31, 2006 3:23 pm
by Hales231271
When you pull off the original drive plates you may find it hard.
There are two tapped holes in the plate that you can screw a bolt int which will pull the plate off.
Make sure you use high tensile bolts but.

Cheers
Dazza