Outer Limits 4x4 Board

The anti lock brake light on my 1993 RRC has come on again. No problem its probably just a sensor gap issue. I have just finished driving it for over 5000ks since it came on and the brakes work fine.
I have the workshop manual which tells me how to read and clear the code, and have done it before. Problem is, I don't know which wires to short out to start the process, the manual says to use "Special Part number ????".
Anyone know what to short out?

here goes...
1)Switch off ignition

2)remove seat side trim and front cover from seat base.

3)Unplug ABS warning plug relay (it has a green base, and is next to the 3 fuses.)

4) turn ignition back on and check warning lamp is on.

5)bridge the Black/pink and black wires on the diagnostic plug, the blue one at front of seat base.

6)after 5 secs ABS lamp will go out as code cycle commences.

I hope you have a code list, as my typing skills leave a bit to be desired...

JC

Thanks Justin.
Will fix it tommorrw