Notice: We request that you don't just set up a new account at this time if you are a previous user.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.

2H Fuel Adjusting Spanner. Maybe 1HZ 1HDT 3B aswell??

Tech Talk for Cruiser owners.

Moderators: toaddog, Elmo, DUDELUX

Forum rules
Post Reply
Posts: 5179
Joined: Fri Dec 05, 2003 8:15 pm
Location: Brisbane Australia

2H Fuel Adjusting Spanner. Maybe 1HZ 1HDT 3B aswell??

Post by Shadow »

Would anyone be interested in one of these?

im gonna make one and if enough people would be interested in one i could put 10 or so through a mates CNC.
Top
Posts: 183
Joined: Wed Nov 12, 2003 4:52 pm
Location: Brisbane

Post by Tooheys »

Could be interested in 2 one for me and a mate. How much you looking at each?
If at first you dont succeed.......get a bigger HAMMER!!!
Top
Posts: 5179
Joined: Fri Dec 05, 2003 8:15 pm
Location: Brisbane Australia

Post by Shadow »

No idea, shouldnt be too much, will just be machined from 5mm plate with 3 silver-steel pins miged in place. Already have the metal, and the cnc'ing will be done cheap.

I will talk to my mate and see how much he wants to run them through the CNC after hours one day. I might just get 20 handles run off and see how it goes

Can anyone tell me if the same tool is used to adjust the fuel in 1HZ 3B etc?
Top
Posts: 1715
Joined: Tue Sep 06, 2005 8:38 pm
Location: at my wits end

Post by RED60 »

How many axis is the cnc. When the're done post a price up. I mite be interested. :cool: :cool:
Show me the money..SHOW ME THE MONEY
Top
Posts: 310
Joined: Thu Apr 20, 2006 10:38 am
Location: Melb. AU

Post by hdj105 »

Shadow wrote:
Can anyone tell me if the same tool is used to adjust the fuel in 1HZ 3B etc?
The rotary pumps (eg. 1HZ, 1HD-T, etc) only require normal hand tools (12mm and 6mm).
Greg G
2000 HDJ105
Top
Post Reply

Return to “Cruiser / Prado”

Who is online

Users browsing this forum: No registered users and 1 guest