Page 1 of 1
GU TRANSFER CASE
Posted: Tue Sep 05, 2006 1:01 pm
by TT80
Hi all i have fitted a gu transfer case to my landcruiser and are in the process of wireing it up.There are 3 sets of wires coming out if it.I know which wire is for the speedo.One of the others is for the 4wd light but i don't know which one.what is the other wires for.I am not sure what model Gu it came out of.Any help will be appreciated.
Cheers TT80
Posted: Tue Sep 05, 2006 2:02 pm
by raptorthumper
Here you go.
___________________________________
Posted: Tue Sep 05, 2006 2:02 pm
by raptorthumper
oops double post.
____________________________
Posted: Tue Sep 05, 2006 5:56 pm
by TT80
Thanks that is excellent. that takes care of the speedo and the dash light. Do i need to worry about the neutral switch?Is it for a nissan dash or auto? Do you know if the transfer case will work ok without it connected
cheers TT80
Posted: Tue Sep 05, 2006 7:21 pm
by AndrewPatrol
According to my Gregory's wiring diagram the Auto trans models only make use of that switch to activate cutout circuit. Its only activated when the lever is between 4H and 4L ( push position- neutral ) I think its activates a warning light on dash to signify possibility of non locking of transmission when in Park. One of those Safety things.
Posted: Wed Sep 06, 2006 8:09 am
by TT80
Thanks for the info
cheers TT80