Notice: We request that you don't just set up a new account at this time if you are a previous user.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.

Whats involved in shimming an LSD?

Tech Talk for Cruiser owners.

Moderators: toaddog, Elmo, DUDELUX

Forum rules
Post Reply
Posts: 210
Joined: Mon Jul 18, 2005 7:24 pm
Location: victoria

Whats involved in shimming an LSD?

Post by chevJ40 »

Tried searching and either im crap at it or i just cant find what i want, but im tryign to find out exactly what is involved in Shimming an LSD ?
A. how to do it
B. how much does it normally cost?
cheers
Top
Posts: 3725
Joined: Wed Jun 30, 2004 1:45 pm
Location: Blue Mountains, or on a rig somewhere in bumf*ck idaho

Post by rockcrawler31 »

i don't know any thing about shimming a diff, but i imagine that by the time you pay a diff specialist a few hundred bucks to do the job you may as well fork out 800 for a second hand locker. I did and it transformed the trucks performance
http://www.populationparty.org.au/
Top
Posts: 407
Joined: Wed Aug 20, 2003 10:02 am
Location: Hornsby Sydney

Post by Surfin Alec »

About 3 or so editions of 4wd monthly ago there was a write up and good pics of what was involved. Interesting read too.
It was about a pajero diff I think, Hornsby Diffs did the job. Basically cut shim sheet to shape and packed clutch plates with the shim at either end to tighten the clutch and re-assemble.

Alec
GO the 80...The mods have started :-)
Top
Post Reply

Return to “Cruiser / Prado”

Who is online

Users browsing this forum: No registered users and 0 guests