Page 1 of 1
Where the hell!
Posted: Wed Sep 06, 2006 9:21 pm
by monkeyplex
It seems like quite allot of suzuki owners have coil spacers, but no matter how hard i look, nobody sells them! Is it just me or is Victoria useless for suzuki mods?
Do any Melbournians on this formum have coil spacers? If so where did you get em from?
Cheers blokes
Re: Where the hell!
Posted: Wed Sep 06, 2006 10:23 pm
by SiKiD_01
monkeyplex wrote:It seems like quite allot of suzuki vitara owners have coil spacers, but no matter how hard i look, nobody sells them! Is it just me or is Victoria useless for suzuki mods?
Do any Melbournians on this formum have coil spacers? If so where did you get em from?
Cheers blokes
how big of a spacer do you want? 30mm, 50mm, 75mm, 100mm???
i live in darwin, and i thought here would be the last place on earth that would have vitara gear. i guess here and melbourne then.
i can get you some, and so can bruce from north brisbane suzuki club.
Posted: Wed Sep 06, 2006 10:36 pm
by PJ.zook
Mexico is pretty useless for anything suzuki in the scheme of things, especially parts
Posted: Thu Sep 07, 2006 1:06 pm
by monkeyplex
I want 30 mm minimum, but the bigger the better, don't want do get new struts and shocks if i can get away with it. But i will flip the strut mounts if i have to. What modifications have to be done to fit each spacer size?
Queensland is the place to be for 4x4 gear. I mean vic is fine if you have a toyota or patrol, theres stuff everywhere for them, but despite quite a large amount of mexican suzuki off-roaders there is bugger all in the way of commercial products for them! I guess they fab everything themselves i just dont have the tools like welders and all that other guchi stuff.
Posted: Thu Sep 07, 2006 1:35 pm
by grimbo
just order them from interstate, it's not like they are going to be expensive to post
Posted: Thu Sep 07, 2006 2:08 pm
by sierrajim
Or try Pro Comp in Narre Warren.
Just be mindful of your CV angle when you lift your car.
Posted: Thu Sep 07, 2006 4:31 pm
by grimbo
actually can't you get them from ARB as well?
Posted: Thu Sep 07, 2006 5:08 pm
by monkeyplex
ive tried Pro Comp in Narre Warren, they don't make them for the vitara. I havent come across any ARB spacers.
As for my CV angles, at the moment they are pretty much horizontal along with the suspension arm. What do you think is the biggest spacer i could get in without any CV troubles?