Page 1 of 1
Sierra soft hard top
Posted: Wed Sep 06, 2006 9:23 pm
by CWBYUP
Is the fiberglass piece for the front of a sieera soft top ( above seats ) a wanted item ?
Think i've just found a supplier for them if any ones interested I might do a group buy ?
Nick
Posted: Wed Sep 06, 2006 9:49 pm
by Santos
Depends on how much they are
Posted: Wed Sep 06, 2006 10:28 pm
by CWBYUP
probably about $200 there ringing me back tommorrow with a fim price each.
its seems pretty good it even got the quick release hinges apparently.
Nick
Posted: Wed Sep 06, 2006 10:36 pm
by SIERRA BANDIT
id be interested
Posted: Thu Sep 07, 2006 8:13 am
by Pep
SIERRA BANDIT wrote:id be interested
x2
Posted: Thu Sep 07, 2006 9:35 am
by =SKB=
I as well. Got pics?
Posted: Thu Sep 07, 2006 9:50 am
by Potter
me 3
Posted: Thu Sep 07, 2006 9:52 am
by v840
Me 4
Posted: Thu Sep 07, 2006 10:53 am
by zukirolly
me 5, flexiglass quoted me $300 for the front section.
Posted: Thu Sep 07, 2006 12:16 pm
by CWBYUP
Well i just got Screwed.
I cant say by which company but someone at this company found out i was trying to buy these from there supplier and put a stop to it.
Work was going to let me sell them real cheap if i could get them but
Any way i will try to source them from somewhere else and get back to everyone.
Nick
Posted: Thu Sep 07, 2006 5:42 pm
by suzuki boy
I was lucky and mine came with one!
Have heard there hard to get but didn't know they were worth that much. Arn't they just thick fibre class?
Posted: Thu Sep 07, 2006 8:42 pm
by zukirolly
not class, fibreglass.
I have the back section but not the front so it looks like i'll have to buy the $300 one and paint it black, flexiglass want an extra $90 for black!
Posted: Fri Sep 08, 2006 7:28 pm
by suzuki boy
Mine came with the back bit and the front bit but i got the ute style soft top made .
Posted: Sun Sep 10, 2006 8:23 pm
by josh9465
nick
are you able to get the rear canopy as well as the front. but without the flexiglass price of $2k+++
josh
Posted: Tue Sep 12, 2006 3:56 pm
by =SKB=
So anything happening with this?
Posted: Tue Sep 12, 2006 7:27 pm
by crankycruiser
any one wanna buy the hole fiber glas bit.. thats the front and the back bit with the door and all for 200 second hand??
PM me if ya interested
Posted: Tue Sep 12, 2006 7:58 pm
by =SKB=
I would take it right now but your in Tassie and freight would cost twice what your asking alone.
Posted: Wed Sep 13, 2006 9:24 am
by zukirolly
i might be interested cranky, looks like i might be heading over in about 1 month.
Where in tassy are you?
Posted: Wed Sep 13, 2006 9:43 am
by Hottuna
Seeing how so many people are interested in getting a hard front top.
Why doesnt someone get in contact with a fibreglassing company, a surfboard manufacturer or a body kit manufacturer and see how much it would cost to get them made yourself. The mold shouldnt be to hard to make if you have a roof that you could copy considering the simplicity of it and I'm sure if you can confirm money from people you could get the first few made for <$200/unit.
The only problem with doing it yourself is getting the 4 clips moldded into the roof like they are on the flexiglass roofs but if you werent to worried about appearence you could just bolt them on straight through the top. The seals are available from Clark Rubber.
We would even consider buying another one for our Zook if it had a flatter top as we would like to put a tinted glass panel in the roof.
Cheers