Notice: We request that you don't just set up a new account at this time if you are a previous user.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.

Testing for electrolysis in new radiator

For all things Electrical.

Moderator: -Scott-

Forum rules
Post Reply
Posts: 154
Joined: Sun Oct 09, 2005 8:08 pm
Location: Newcastle

Testing for electrolysis in new radiator

Post by nickw86au »

Hi guys,

I've just replaced my radiator in my '89 sierra as it had a crack up the top where the hose joined to the tank. (details here http://www.outerlimits4x4.com/PHP_Modul ... 733#899733 ) - I figured that it was pretty old anyway, and so just replaced it.

In the instruction booklet it said to check for electrolysis by connecting the a meter to the -ve terminal on the battery and dipping the +ve probe into the coolant. I don't have a meter that is able to test the small currents involved (0.05V, or 50 millivolts). Is it worth

a) buying a meter to check it
b) going to the local autoelectrician and getting them to check it, or
c) dont worry about it cause it was just a crack and probably caused by shaking around in a swb leaf-sprung car?

Thanks for you replies

nick.
Top
Posts: 2384
Joined: Mon Mar 31, 2003 10:05 am
Location: Brisbane or 169.254.243.241

Post by RaginRover »

go to bunnings and buy a meter - they have ones for $6 in the electrical section - it is a bit of gear you need.

Tom
"It was just an ordinary day, and you saw them. There were guys in their Porsches, "Look at me in my Porsche, ha ha!" and they were overtaken by a van. Driven by a girl!"
Top
Posts: 170
Joined: Fri Mar 03, 2006 10:55 pm
Location: ipswich

Post by Oscars »

yep get a multimeter as they are very handy, and if u dont no what u are doing just go to a auto elect and ask them to check for u as it takes 2 secs, they shouldnt charge u, i wouldnt.
Top
Posts: 154
Joined: Sun Oct 09, 2005 8:08 pm
Location: Newcastle

Post by nickw86au »

Thanks guys, I have got one, but it's digital one that only goes down to 200mV... might just get one an analogue one

cheers,

Nick
Top
Posts: 613
Joined: Fri Oct 21, 2005 9:33 pm
Location: virginia, brisbane

Post by ausoops »

thats just the range setting, that setting increases sensitivity so you should be able to pick up 0-200mV no worries.
Top
Posts: 154
Joined: Sun Oct 09, 2005 8:08 pm
Location: Newcastle

Post by nickw86au »

oh, ok. cheers. Will have another go at it.

Nick
Top
Post Reply

Return to “Auto Electrical”

Who is online

Users browsing this forum: No registered users and 0 guests