Page 1 of 1
Bump Stops
Posted: Mon Sep 11, 2006 6:23 pm
by MQSWBUTE
thinkin of cutting half the bump stop off to get a little more travel right now the tyres dont rub (35/12.5)
the question is do you see a problem with it ???
cheers
justin
Posted: Mon Sep 11, 2006 6:32 pm
by jeep97tj
The tyre looks very close to the chassie now removing the bump stop may cause it to rub? Just do 1 side if it doesnt work buy another from the wreckers.
Do u have enough up travel in your shocks??
Posted: Mon Sep 11, 2006 6:35 pm
by MQSWBUTE
yea penty of travel in the shocks i had them out today and measured up
Posted: Mon Sep 11, 2006 7:43 pm
by pongo
GO for it man, If i could i would. What type of kellys are they.
Posted: Mon Sep 11, 2006 8:09 pm
by Brett S
if that's an mq those bump stops are twice as long as the std ones on a shorty have al look at them and prob get them from a wrecker for stuffall
Posted: Mon Sep 11, 2006 8:10 pm
by MQSWBUTE
Kelly Safari DTR 35/12.5-15
Posted: Mon Sep 11, 2006 8:10 pm
by MKPatrolGuy
I pulled mine out completely
Posted: Mon Sep 11, 2006 8:14 pm
by MQSWBUTE
MKPatrolGuy wrote:I pulled mine out completely
what did u have a far as spring and body tyre size go
i got 2in body 2in sping and 35s
Posted: Mon Sep 11, 2006 8:18 pm
by MQSWBUTE
Brett S wrote:if that's an mq those bump stops are twice as long as the std ones on a shorty have al look at them and prob get them from a wrecker for stuffall
i still cant tell the diffrence people say round headlights are mq mine sqaure on the plate its a mq and anything after 85 then made sqaure headlights on em ...mines 84 im confused to know which one is which
Posted: Tue Sep 12, 2006 12:43 am
by MKPatrolGuy
MQSWBUTE wrote:MKPatrolGuy wrote:I pulled mine out completely
what did u have a far as spring and body tyre size go
i got 2in body 2in sping and 35s
2" body lift, sagged springs & 35s.
Posted: Tue Sep 12, 2006 2:24 pm
by NCpaj
The tyre looks very close to the chassie now removing the bump stop may cause it to rub? Just do 1 side if it doesnt work buy another from the wreckers
i cut my bumpstops from 70mmish to 20mm i say cut them off
and for the rubbing on the chassis wheel spacers should fix that
Posted: Tue Sep 12, 2006 11:10 pm
by Hoppy11
They look like MK bump stops, before you cut, grab some MQ ones from a wrecker cause they are already short.
HOPPY