Outer Limits 4x4 Board

Originally Posted by Stoo
I have the kit from rs-mfg on my truck - its good - and very simple, you get an adaptor plate that bolts to the end of the rear axle housing and then you can use the front hub assembly, including the disc brakes on the rear. You get new hardened shafts too.

Seems to work great on my truck, had a few issues with the bolts coming undone on the drive flanges but I think that is becuase of the locker.

Rob of RS mfg sends a lot of his gear to you guys in the US, he supplies some of the major dealers. He may not answer his emal very quickly though - he is very busy.

Stoo

Barathrum wrote:I thought this might be of some interest. Full floating rear axle kit.
I wonder what freight out here would be worth??
It could enable staying with Suzuki gear for a lot longer and avoiding some of the hassles of engineering associated with diff swaps.
http://www.worcester-networks.com/rsmfg/axle.htm

From a small thread on pirate
http://www.pirate4x4.com/forum/showthread.php?t=505564

Originally Posted by Stoo
I have the kit from rs-mfg on my truck - its good - and very simple, you get an adaptor plate that bolts to the end of the rear axle housing and then you can use the front hub assembly, including the disc brakes on the rear. You get new hardened shafts too.

Seems to work great on my truck, had a few issues with the bolts coming undone on the drive flanges but I think that is becuase of the locker.

Rob of RS mfg sends a lot of his gear to you guys in the US, he supplies some of the major dealers. He may not answer his emal very quickly though - he is very busy.

Stoo