Outer Limits 4x4 Board

Does anyone know the part number for a genuine GQ trailing arm bushes?

I think they are 55045-06j00, but I want confirmation that these are the correct bushes to use?

I am making a 4 link for the 4runner and want to use standard rubber bushes in the links.

Thanks
Chris.

have a look in the bible in the nissan section

55045

Chris if your not to worried I get my bushes from Wilkinsons and they are nissan skyline rear lower control arm bushes almost as big as a patrol.These bushes are a alloy outer bonded to a nylon bushing with a steel crush tube about $70 for a packet of 4 lots cheaper than original nissan bushes which were about $45 each or go to off road industries they do a replacment bush made with alloy outer nylon inner special design to get more twist out of they also sell the outer weld on tubes to weld to the end of your arms not to bad on price but not as good as the skyline ones your call but never had the ones I use flogg out yet.

Duncan
Team Evolution

ok, got a old bush and the part number is imprinted on the rubber - 55045-06j00

I know the gq bushes are expensive but I think they are the best compromise between flex and durability.

Chris.