Outer Limits 4x4 Board

I am fitting 37" mtrs to my GQ and want to know how low I can keep it? I am not affraid to grind the bits that touch but I will obviously need more than my current 2" lift.
Can I get away with 4" or do I really need 7"?????

Thanks Dave

I run 3 inch spring ,2 inch body and could run 37's.
I only run 36inch pedes but the 37 would go i just cut the gaurds out to fit them
cheers

So they don't touch at the top, or only the leading and trailing edges of the guard? Is this at the front only or do I need some surgery at the rear?

Thanks Dave

CruiserPatrol wrote:So they don't touch at the top, or only the leading and trailing edges of the guard? Is this at the front only or do I need some surgery at the rear?

Thanks Dave

They go up in side the guards on full flex.
I folded the lip over a bit so it does'nt hit the tyres when there right inside the guards and i cut both front and back guards the front one's only the backs and the back you can cut all the way around
hope that makes scence

Thanks man,

so 5" lift looks like the go.

Thanks again Dave