Page 1 of 1

diff ratios in a 2f, 55series??

Posted: Sun Sep 17, 2006 3:47 pm
by TYLER
hey guys jus wanna know wat the diff ratio is in the 55series, its got a 2f petty mota and is an 82 mod... and info is helpful

CHEERS tyler :D

Posted: Sun Sep 17, 2006 3:58 pm
by pcman
4.11 same as 40 series diffs

Posted: Sun Sep 17, 2006 4:56 pm
by bad_religion_au
bingo... 4.11:1

Posted: Sun Sep 17, 2006 5:55 pm
by TYLER
next question same punpkin size or larger???

Posted: Sun Sep 17, 2006 8:53 pm
by bad_religion_au
TYLER wrote:next question same punpkin size or larger???
EXACTLY the same pumpkin, ratio's, and side gear splines (well after 1969) as both diffs from the 40 series, 60 series and early 75 series and rear of the later 70 series, 80's and 100

Posted: Sun Sep 17, 2006 9:33 pm
by mudmacaca
While we are on the topic.
Does the rear diff pumkin of a 4runner fit a 60 series? If not are the crown wheel and pinion the same?

Sorry to rape your thread :)

Posted: Sun Sep 17, 2006 10:35 pm
by bad_religion_au
mudmacaca wrote:While we are on the topic.
Does the rear diff pumkin of a 4runner fit a 60 series? If not are the crown wheel and pinion the same?

Sorry to rape your thread :)
nope, ring gear is 8 inch from the 4runner, 9 and 1/2 in the 60.

60 diff is much bigger, so no dice on swapping

Posted: Sun Sep 17, 2006 11:01 pm
by mudmacaca
Cheers Mate

Posted: Thu Sep 21, 2006 7:27 pm
by TYLER
bad_religion_au wrote:
TYLER wrote:next question same punpkin size or larger???
EXACTLY the same pumpkin, ratio's, and side gear splines (well after 1969) as both diffs from the 40 series, 60 series and early 75 series and rear of the later 70 series, 80's and 100
so would beable to runn up to a 37" tyre off em? or can i go bigga ?