Notice: We request that you don't just set up a new account at this time if you are a previous user.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.

sensor flood light to lightbulb socket!

For all things Electrical.

Moderator: -Scott-

Post Reply
Posts: 2513
Joined: Sat Mar 05, 2005 1:14 am
Location: ingleburn

sensor flood light to lightbulb socket!

Post by familybus »

i know this aint 4x4 tech but i need some help from a sparky please ! what i need to know is can you get a sensor flood light that plugs straight into a light bulb bayonet fitting or am i better off chasing one that just plugs into normal electrical socket? thanks in advance! ;)
[color=lime][b]Im not a gyno but ill take a look at it for you![/b][/color]
User avatar
Jok
Posts: 15
Joined: Wed Aug 23, 2006 8:13 pm

Post by Jok »

Go have a look at a place like bunnings there mate,
Jok
White '99 GU 4.2D DX Wagon,
with a couple of add-ons
Posts: 47
Joined: Fri May 19, 2006 7:55 pm
Location: Melbourne

Re: sensor flood light to lightbulb socket!

Post by Drewski »

familybus wrote:i know this aint 4x4 tech but i need some help from a sparky please ! what i need to know is can you get a sensor flood light that plugs straight into a light bulb bayonet fitting or am i better off chasing one that just plugs into normal electrical socket? thanks in advance! ;)
I'm not a sparky, but, yes, you can, but the wired ones are a piece of piss to fit also.. :-)

Head down to Middy's or Bunnings, or your neighbourhood lighting shop, and get what you like the best...
Driving a Subaru Forester XT with some mods...
Shopping for a Prado GXL D4D with extra bits...
Posts: 613
Joined: Fri Oct 21, 2005 9:33 pm
Location: virginia, brisbane

Post by ausoops »

i didn't think you could but if you can you won't have manual overide to keep it on.
Posts: 5179
Joined: Fri Dec 05, 2003 8:15 pm
Location: Brisbane Australia

Post by Shadow »

ive never seen what your looking for.
Posts: 522
Joined: Sat Jan 29, 2005 7:40 am
Location: Melbourne, Vic

Post by Toy80Diesel »

It is available, have seen them in bunnings.

They are a "DIY sensor light".

No wires required as they have a bayonet or screw socket to plug into the original lamp socket and then you just screw the complete thing to the wall/ceiling.
Shut Up, Get Out, & Start Digging...
Post Reply

Who is online

Users browsing this forum: No registered users and 1 guest