Outer Limits 4x4 Board

Had an idea the other day,

Ive already got X-over fitted, but i want to lower the lux a little,

Im thinking about buying another ORI arm and having the taper drilled in from the bottom and then getting a flatter pitman arm on the box, hoping to get some standard height springs in there that will sit on the dropped hangers and extended shackles, effectively giving it a 2" lift instead of about 4-5" that it has now.

Has anyone done this and how low have they gotten it?

And dont tell me to get hi-steer, its just too expensive at the moment.

Thanks.

In the 2 sas we have done we have no droped hangers and 2" springs using the Y arm from ORI with the reverse tapers (underneath) and have no problems with clearance issuses with it at all.

Using the stock pitman arms.

look at my build up it is done that way, low biatch!

Thanks.