Page 1 of 1
front control arm spacers
Posted: Tue Oct 21, 2003 6:45 pm
by bill
where can i get front control arm spacers,wanting to move the diff foward about 25 mm
Re: front control arm spacers
Posted: Tue Oct 21, 2003 7:30 pm
by bogged
Just get some round steel and drill a hole in it.
25mm is a big move, usually 15mm is around normal
Re: front control arm spacers
Posted: Tue Oct 21, 2003 7:38 pm
by Area54
bogged wrote:Just get some round steel and drill a hole in it.
Bit more complex than that, you need to space the bush and the lock nut.
Binskins 4wd centre in Wauchope make a complete kit to move the front diff forward.
Posted: Tue Oct 21, 2003 7:48 pm
by bill
thanks ,i was going to make my own ,then i read you can buy these,just wanted to now where to ring,to see how much they are.
Posted: Wed Oct 22, 2003 1:02 pm
by Wendle
whereabouts are you? overkill do them in sydney...
Posted: Wed Oct 22, 2003 1:03 pm
by Wendle
you can only go about 12mm as well, or you run out of thread on the radius arm.
Posted: Wed Oct 22, 2003 7:02 pm
by Drafty
If in Vic we can machine a set up for you. The max you will get is about 12mm as wendle said.
Posted: Wed Oct 22, 2003 9:57 pm
by bill
Im in vic,was at boho on the weekend in the black shorty,how much they worth drafty? , and how long ago did you do origon track at the otways thinking of doing it in the next few weeks