Page 1 of 1
crack in t700 mounting
Posted: Mon Sep 25, 2006 11:30 am
by chunderlicious
i have managed to snap one of the mounting holes for my t700 auto, was wondering if it can be re welded or if its a throw away?
the crack is right through the middle hole on the drivers side belhousing/convertor housing
Posted: Mon Sep 25, 2006 4:27 pm
by jessie928
weld it.
you can use an alloy welder ( mig/tig) or those super dooper sticks you get from carshows that you use with an oxy.
Jes
Posted: Mon Sep 25, 2006 6:56 pm
by chunderlicious
cheers ill sell it anyway, i want manual
Posted: Mon Sep 25, 2006 8:08 pm
by awill4x4
I've welded a few T700 bellhousings (Tig welded) but they are a really crap casting and a biatch to weld. Although the weld looked OK externally I know it was basically an aero bar inside. In cases like those I always warn the customer not to expect miracles.
Regards Andrew