Outer Limits 4x4 Board

i have a ln106 4wd and the front brakes have only lasted 13,000klms and are down to metal prior to that they lasted 20,000klm and before that were atleast 60,000klm.Do i have a problem with the master cylinder with it putting the main braking effort on to the front or did i just get some very dodgy brake pads the last 2 times (and yes i did change brands between the 2)

It's possible that the pistons in the callipers are sticking causing the to hold a slight bit of pressure on all the time hence the times becoming shorter and shorter as time goes on. Do they wear uneven as this can be a dead give away. Quality of pads do come into play aswell.

Your brakes are bias towards the front anyway,but 13,000k`s thats a joke. Look at a stuck piston for sure,put then again you`d probally be able to smell your brakes burning

updated info at the moment its at a brakes place having new rotors put on as the old ones were too thin to machine. Hopefully they have a good look and play while everything is stripped back.

sic lux they are wearing evenly and no brakes smell so maybe the needed a good machining and high quality pads

dave

Your LSPV is probably farked aswell

is your truck raised ???
has the brake place checked the lspv up the back that attached to the diff

The load valve will need to be checked as it will cause the front pads to wear out too quick


Matt