Page 1 of 1
f250 diff identidication.
Posted: Thu Sep 28, 2006 1:00 pm
by andrew e
Im trying to ID a 2000 mod 6cylTD f250 front diff, I dont know if it is a d60 or d50. The only numbers are on a tag that says
248 4.10 V 2C34 GB - 611299-2
I think it is 4.1 ratio bu dont know anything else
Anyone?
Andy
Posted: Thu Sep 28, 2006 1:15 pm
by wrksux
try over on pirate4x4 or pavementsucks.com those guys should know
Posted: Thu Sep 28, 2006 1:22 pm
by jeep97tj
I think only some F350s came out with D60 fronts.
Posted: Thu Sep 28, 2006 5:09 pm
by dbongard
Do you know the inner spline count?
If not, send us a shot of the diff cover and we should be able to pick it for you.
-daniel
Air Locker
Posted: Thu Sep 28, 2006 5:17 pm
by Micka
Posted: Thu Sep 28, 2006 7:10 pm
by spazbot
the BOM no 611299 dosnt come up on the dana site at all
from looking at the dana site some more seems 2000 mod f250s came with a dana 50 (44 center with 60 knuckles)
if its cheap get it and buy a rockcrusher 60 center for it.....
Posted: Thu Sep 28, 2006 11:14 pm
by andrew e
OK, i'm fairly sure it is a D60 center as the site Micka posted states that 248 means 248mm (9 3/4") which is the diameter of the D60 ring gear, So if it has a D60 center, could it have D44 knuckles? i thought only D50s had D44 knuckles, or are a D60 and D50 center the same?
i'm lost and confused help.
Posted: Fri Sep 29, 2006 8:20 am
by dbongard
Dana 60, high pinion, reverse cut, 35 spline.
Nice gear for a 110
