Outer Limits 4x4 Board

... and still didnt get over 1/2....




... it was nearly solid for most of that mid section between rad and the air cond condenser... all seeds and grass...


4 hours with air compressor and hose... still gettin shit out of it after that!

Thanks to GUJOHNNO for use of compressor...

Rudi.
You will have a field of spinnafex in ya front yard within 2 yrs...

Yep, been there, done that ...

Karcher does the job.

RoldIT wrote:Yep, been there, done that ...

Karcher does the job.

was told not to use em as it bends shit out of the fins??

would have been easier than the compressor as it got that hot you could smell it inside the house up the back.

Just an observation but your radiator looks significantly longer than mine.

Mine (if I recall correctly) is wider rather then tall yet your looks much taller than wide ...

Must be something to do with the later model TD42Ti ...

bogged wrote:

RoldIT wrote:Yep, been there, done that ...

Karcher does the job.

was told not to use em as it bends shit out of the fins??

would have been easier than the compressor as it got that hot you could smell it inside the house up the back.

Care is advised but I didn't bend one (that I noticed) and I also have one of the higher pressure consumer Karchers.

RoldIT wrote:Just an observation but your radiator looks significantly longer than mine.

Mine (if I recall correctly) is wider rather then tall yet your looks much taller than wide ...

Must be something to do with the later model TD42Ti ...

TD6 has the 4.8 longer narrower radiator... I looked at one in another GU the other week it was easily 4inch wider...

Edit; now to figure out how to do the Air Cond condensor without removing it...

Yep, sounds about right. Mine seemed VERY wide.

RoldIT wrote:Yep, sounds about right. Mine seemed VERY wide.

be nice to get one that combined the 2.. longer thicker and wider RADIATOR.. settle kiddies...