Page 1 of 1
harmonic balancer puller
Posted: Tue Oct 03, 2006 4:37 pm
by matthewK
how the hell do ya use a 13pce harmonic balancer puller
made by tft
trying to pull the balancer off
Re: harmonic balancer puller
Posted: Tue Oct 03, 2006 5:16 pm
by F'n_Rover
matthewK wrote:how the hell do ya use a 13pce harmonic balancer puller
made by tft
trying to pull the balancer off
do it up tight - then wack the bejeusus out of it (the centre bolt), should pop off.
Posted: Tue Oct 03, 2006 7:26 pm
by matthewK
i worked it out they gave me the wrong one ,
seal all done now:)
funny the bolt holding the harmonic balancer on was not all that tight at all
but it is now
Posted: Tue Oct 03, 2006 9:08 pm
by Nev62
matthewK wrote:i worked it out they gave me the wrong one ,
seal all done now:)
funny the bolt holding the harmonic balancer on was not all that tight at all
but it is now
Went through to harmonic balancer pullers today on the commodore. cheap crappy things that they are
(centre thread stripped). Went to ge a half decent one made from steel but could not justify the extra $$$ so just brought another cheap one to break
Posted: Tue Oct 03, 2006 11:19 pm
by matthewK
they gave me the old bolt on one and the nissan dont have hole to screw them into, ended up useing a gear puller or somthing did the trick and didnt brake, i even got my timing line back on it
reaplaced the seal old one was hard and crusty,
last time i went to super crap i got the pitman arm puller to which i snapped clean
i payed 22 odd for the gear puller, plus a further $12.60 for a 27mm impack 6 sided socket,
next on my list is to do tappets/valve clearnce and work out the power steering leak