Outer Limits 4x4 Board

Posted: **Wed Oct 04, 2006 6:52 pm**

does the rear disc brake conversion change the off set at all . cheers ron ps 91 wt sierra

Posted: **Wed Oct 04, 2006 6:53 pm**

i got the spider trax kit adds about 25 mm a side extra.

Posted: **Wed Oct 04, 2006 6:54 pm**

My setup added about 20mm total to the width.

Posted: **Wed Oct 04, 2006 7:11 pm**

Mine added around 10mm each side.
I needed to use front wheel studs in the rear.
Can't see it or feel it.
christover

Posted: **Wed Oct 04, 2006 7:13 pm**

is their any way off doing this without changing offset . cheers ron

Posted: **Wed Oct 04, 2006 7:17 pm**

need the tyres in the same spot because thats what works down hear . if i go wider i will fit in the rut and i dont want that. cheers ron

Posted: **Wed Oct 04, 2006 7:18 pm**

mine has added zero

the track is the same as before.

Mitch

Posted: **Wed Oct 04, 2006 7:19 pm**

mitch what sort did you get . cheers ron

Posted: **Thu Oct 05, 2006 9:49 am**

ronoor wrote:need the tyres in the same spot because thats what works down hear . if i go wider i will fit in the rut and i dont want that. cheers ron

Did you read chris's post ... he is only 2cm wider ...

The short answer is no you cant do it without making your truck oh so ever so marginally wider ...

Posted: **Thu Oct 05, 2006 10:42 am**

Change the offset of the rear wheels after it is done or do wheel spacers on the front to match the rear.

Nic

Posted: **Sat Oct 07, 2006 5:40 pm**

ahhhhhh.....20mm won't do jack as far as ruts are concerned.

Posted: **Sat Oct 07, 2006 6:29 pm**

beg to differ the tracks i'm talking about 9'5 tyre wont make it yet a 10'5 will. cheers ron

Posted: **Sat Oct 07, 2006 8:02 pm**

ronoor wrote:beg to differ the tracks i'm talking about 9'5 tyre wont make it yet a 10'5 will. cheers ron

Mexicans!

What are you doing ron, crossing a gully over 2 slippery logs?

Outer Limits 4x4 Board

disc conversion ( off set )

disc conversion ( off set )