Page 1 of 1
crown wheel and pinion advise
Posted: Wed Oct 04, 2006 9:17 pm
by BUSTED100
Just wondering if any body could help me out, with the diff ratio of a 1993 80 series (Turbo diesel)? Destroyed the front diff and require a new crown wheel and pinion.
there was a small stamp with 41 on the side, I looked on Snake Racing site etc and believe it's the high Pinion 4.1, but would like to get some confirmation before ordering.
Thanks
Posted: Wed Oct 04, 2006 10:09 pm
by simkell
4.1 was turbo diesel and 4.3 1hz.
Posted: Thu Oct 05, 2006 8:01 am
by dow50r
Gday
All 80's were 41/10 or 4.1 high pinion....i have sent a PM, as i am local.
If he doesnt want to do this again, he needs to get an ARB locker centre up front...100% stronger support for the gear teeth.
Andrew
Posted: Thu Oct 05, 2006 5:50 pm
by BUSTED100
dow50r wrote:Gday
All 80's were 41/10 or 4.1 high pinion....i have sent a PM, as i am local.
If he doesnt want to do this again, he needs to get an ARB locker centre up front...100% stronger support for the gear teeth.
Andrew
Thanks, received PM and will give you a call before the weekend, as for lockers I have the e-lockers which come standard in the Saharra but I feel it may be sticking/ not quite disingaging
