Outer Limits 4x4 Board

Hey i was just wondering if there is anywhere in NSW where you can either buy or get your rims offset increased?

Probably easier to just buy a set of sunraysia's with the offset you require. Nice name btw

Neals wheels at 30 Gould st, South Strathfield will ghange the offset, re drill holes, make you spacers, whatever you want. cost for offset change is about $70 a corner and that does not include painting..... Would be cheaper to buy new with the offset you want

Can you buy sunraysia rims with a big offset allready made? Where can you get them?
Mitch

83zook wrote:Can you buy sunraysia rims with a big offset allready made? Where can you get them?
Mitch

15x8 can be had in a -28 offset max. Speedy Rims desert rat is the rim that can be bought with this offset. What size rims do you want, and how big a offset do you want. Is this to clear springs, or are you after increased track??


Layto....

I only want 15x7 rims, and are to both clear suspension components and increase track width.
Thanks

83zook wrote:I only want 15x7 rims, and are to both clear suspension components and increase track width.
Thanks

Go and talk to a wheel and tyre joint, check their catalogue for rims with a 5 on 5.5 PCD and large offset, then order or hunt some down. Easy as.


Layto....

I made this list to run 17's but you can use it on 15's it might be helpful
http://bbs.zuwharrie.com/content/topic,42287.0.html

83zook wrote:I only want 15x7 rims, and are to both clear suspension components and increase track width.
Thanks

The largest off the shelf -ve offset 15x7s are -15. These will increase your track width 50mm overall, which coincidentally is as much as you can do legally (in Qld anyway).

I'm pretty sure these will allow you to run a 31x10.5 without rubbing on the front springs on full lock.