Page 1 of 1
GU diffs, front and rear
Posted: Sun Oct 08, 2006 6:39 pm
by 90pickup
I will run a GU front axle on my LR and a custom made rear GU on the back. Does a front ARB locker (31spline) fit into the rear GU third member? Is the ring and pinion the same front and rear? I also noticed that the splines on the CV`s are the same as on the shafts (both 31), correct? Cheers
Re: GU diffs, front and rear
Posted: Mon Oct 09, 2006 8:16 am
by dbongard
90pickup wrote:Does a front ARB locker (31spline) fit into the rear GU third member?
Assuming you have the small H233B rear as opposed to the large H260 rear, then the diff centres are interchangeable with the exception of the axle spline count (31 frtont, 33 rear). But you can swap over the 2 side gears inside if you need to.
daniel
AIR LOCKER
GU
Posted: Wed Oct 11, 2006 2:53 am
by 90pickup
Thanks mate, you saved my day and the money for the christmas presents for the missus...........