Outer Limits 4x4 Board

I've been told that the carbie vacuum hoses on my '81 FJ60 (2F) are incorrectly routed, but none of my four workshop manuals show the hose connections end-to-end.

Does anyone have a mudmap of where the hoese actually hook up?
There are 5:
Dizzy
Inlet manifold (front)
Inlet manifold (back - hanging off some big screw-in finned thingo)
2 vacuum advance "pots" on the carbie.

Any help would be greatly appreciated.
Thanks

as long as they are all below the butterfly on the carb they are all the same thing.

whatever needs manifold vaccuum just hook them up in any order it wont matter