Notice: We request that you don't just set up a new account at this time if you are a previous user.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.

snorkel hole size

Tech Talk for Nissan owners.

Moderators: toaddog, V8Patrol

Forum rules
Post Reply
Posts: 88
Joined: Thu Nov 17, 2005 10:23 pm
Location: traralgon, vic

snorkel hole size

Post by mattlux »

I was just wondering if someone knew what size the hole has to be in a gq guard for a safari snorkel?
Top
Posts: 1090
Joined: Mon Jun 02, 2003 6:58 pm
Location: Hobart

Contact:
Contact DR Frankenstine

gq

Post by DR Frankenstine »

Im pretty sure its 90mm. You need a really long pilot drill as you need to drill at right angles to the guard.
Remember some days your the pigeon and other days your the statue
Top
Posts: 88
Joined: Thu Nov 17, 2005 10:23 pm
Location: traralgon, vic

Re: gq

Post by mattlux »

DR Frankenstine wrote:Im pretty sure its 90mm. You need a really long pilot drill as you need to drill at right angles to the guard.
Yeh i already have ahole there with a safari on it, but looking a making a stainless one, so i need to know what size it is to see if a 3inch rubber 90 will go through without making the hole bigger in the guard.
Top
Posts: 155
Joined: Mon Jul 10, 2006 11:17 am
Location: Brookvale

Contact:
Contact MitchellBros4x4

Post by MitchellBros4x4 »

You will probably need to elongate the whole to fit the 90 bend through it.
Mitchell Bros 4x4 & More
16 Chard Road Brookvale NSW 2100
02 9905 4764

http://www.mitchellbros4x4.com.au
http://store.mitchellbros.com.au/rigid- ... led-lights
Top
Post Reply

Return to “Nissan”

Who is online

Users browsing this forum: No registered users and 4 guests