Page 1 of 1
33's scrubbing
Posted: Fri Oct 13, 2006 5:53 pm
by harks
hey guys just put my 33's on my hilux ute
after 2 or 3 inch spring lift and they just scrub a bit at full flex while turning
how can i fix this waas wondering if i could put extended shackles on front would that fix it, because the back already sits higher?????
any suggestions most appreciated. dont really want body lift...
Posted: Fri Oct 13, 2006 5:59 pm
by 4sum4
Sledgy
Posted: Fri Oct 13, 2006 7:38 pm
by +dj_hansen+
1. use a hammer to adjust the body seam.
2. adjust steering stops.
3. adjust bumpstop length.
4. get spring perches redrilled 25mm forward
5. body lift.
Extended shackles arent really going to effectively fix the problem, optiosn 4 or 5 are more expensive, but will gain you in other areas to, better wheelbase/allowance for bigger tyres in future by redrilling perches, body lift allows more clearance without drastically raising COG and also moves body further away from nasty rocks....
Posted: Fri Oct 13, 2006 10:17 pm
by Sic Lux
Cheap and works great FBH! (f*&%ing big hammer) my 35's hit a little with the diff moved foward so i took to it and all is good now
Posted: Sat Oct 14, 2006 10:11 am
by Struth
Another 1" of lift will do it.
Does it have a body lift, if not Bung some 1" spacers in.
I found 2" sus and 2" body on a 4runner works well with 33s.
The only scrub is occasionally on the factory front mud flap at full lock.
Cheers Struth.
Posted: Sat Oct 14, 2006 10:21 am
by mudmacaca
Dont be scared use the sledge
It worked for me
and probably hundreds more
Posted: Sat Oct 14, 2006 11:32 am
by ausyota
Yeah hit it with the gympie hammer.
If that doesnt work then get out the grinder and welder.
I have 35s on my IFS lux with no susp lift at all and just a 40mm BL...
...and a smidgen of trimming
Posted: Mon Oct 16, 2006 8:24 pm
by HiluxDave
belt sh*t out of it.
I couldnt stand the wait til i get my lift in to go 4by'n, so i did some panel beating.