Page 1 of 1
fariey o/d
Posted: Wed Oct 18, 2006 10:47 am
by crapzooky
im after info about fairey overdrives in relation to fitting to a hilux and were to find them any help would be fantastic
Posted: Wed Oct 18, 2006 3:34 pm
by dibbz
From what I've found on google, they were made/taken over by a company called superwinch and they are no longer made.
I just got one in a replacement box for my 60! oooowwww yea! goes in tomorrow.. :D
Posted: Wed Oct 18, 2006 3:38 pm
by spazbot
dont think there was ever one made for a hilux
Posted: Thu Oct 19, 2006 5:44 pm
by dibbz
f OD
Posted: Thu Oct 19, 2006 6:02 pm
by MUD000
Ive got one sitting in a box in my shed the bloke i bought my 60 off had it in then pulled it out again
Dan
Posted: Thu Oct 19, 2006 6:37 pm
by dow50r
GOOD LUCK they dont sell them anymore for a good reason...most have lost all their smoke...and once that gets out....they r no good anymore...
Pull the main gear circlip and look at the bearing inside there...the rollers usually come out square
Andrew
Posted: Thu Oct 19, 2006 6:45 pm
by Shadow
Yeh the fairy overdrive(normally hooked up to the back of a 4 speed) was not a good piece of equipment. The 5 speed is a better option.
Posted: Thu Oct 19, 2006 7:22 pm
by dibbz
yeh this one is a 5 speed, it's done a fair few k's and it's sweet still, i'm happy with it.
Posted: Thu Oct 19, 2006 9:56 pm
by ozy1
a mate of mine had one of these behind his 5 speed, and up and till willowglen it was sweet, then on one faithfull climb, it went kaboom, and shattered the case, and destroyed it,
Posted: Fri Oct 20, 2006 6:47 am
by dibbz
Why was your mate doing a hill climb with overdrive on for anyway.
Posted: Fri Oct 20, 2006 7:58 am
by dow50r
dibbz wrote:yeh this one is a 5 speed, it's done a fair few k's and it's sweet still, i'm happy with it.
My best advice is to only use it in 5th, so that takes out the option of using it uphills also...the reason i say this is that top bearing is oil splash lubed, and it doesnt get enough unless you are spinning things fast...like at 100km/hr
Posted: Fri Oct 20, 2006 11:38 am
by dibbz
Well 4th is about 2300rpm @ 110k's, I tried 5th and it sat around 1300rpm which is not recommended for 5th gear which is small, thats why the h55f's often pop out of 5th with a bit of wear.
Overdrives = more gears, so the gear oil will probably need changing more often as well.
Posted: Fri Oct 20, 2006 11:43 am
by Shadow
dibbz wrote:Well 4th is about 2300rpm @ 110k's, I tried 5th and it sat around 1300rpm which is not recommended for 5th gear which is small, thats why the h55f's often pop out of 5th with a bit of wear.
Overdrives = more gears, so the gear oil will probably need changing more often as well.
does it use the same oil as the gearbox? or does it have its own oil?
my 89 HJ60 does about 2600RPM at 110k's in 5th. (indicating your fairy overdrive is 1:2),
but for 4th to be 2300rpm at 110 that would mean your h55F has different gearing than mine. My 4th would be about 3000RPM at 110k's
Posted: Fri Oct 20, 2006 7:31 pm
by dibbz
True, that makes sense, I live in the city so I wasn't going for much of a drive after work this week... I'll go for a belt tomorrow and check that :)