Outer Limits 4x4 Board

hey people just wondering if someone could help me out just fitted 6in coils in the fron of my gq tonight but the left side is about 30mm lower than right ? just wondering if the panard rod would have anything to do with it (do have adjustable panard rod on, but its set for a 2in lift have'nt adjusted it yet) if someone could help that would be great cause it looks kinda wierd slanted.

try swapping the springs left to right ?

i put the springs in the right way, as marked on the spring.

Jack it up and take tension off spring and move it about an eighth to a quarter of an inch away from the spring end stop on the top mount...let it down again and give it a good bounce to see if it settles properly.
Hope this helps.


Cheers Keith

Speed humps are your friend............

id try putting them in the other way round, maybe sum1 stuffed up at the factory.

Left are normally slightly shorter due to the extra weight on the drivers side all the time (you fat bastard)


Howver, while this is common for a lot of manufacturers (due to more parts on driver side than passenger) it sounds seriously odd to be THAT different.


Unless of course they built it that way cos you really are that fat.

My 4in springs were 15mm different in height side to side, my truck sits level when I'm in it, but looks a little crooked when it's parked.

I installed the spring the way the factory said to, so I don't worry about it.

PS i want my name back or you can buy the rights lol