my speedo flickers and sticks all the time. so i aquired a new one, trouble is it starts off at 15km/hr and appears to stay 15 out all the way up.
my main question is is there a zero adjustment on these speedos?
also i put some contact cleaner on the old one n got rid of some corrosion. it now works but flickers badly at over 80 any other hints?
Notice: We request that you don't just set up a new account at this time if you are a previous user.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.
speedo
Not sure about GQs but when I had my MQ speedo out (a long time ago now) I seem to recall thatI zeroed it by simply moving the needle on the spindle!
Also a flickering needle can be caused by lack of lubrication of the cable or a kinked or pinched cable.
Cheers
Also a flickering needle can be caused by lack of lubrication of the cable or a kinked or pinched cable.
Cheers
1982 Patrol K160 SWB (MQ) 4L P40 Petrol with Megasquirt fuel injection and EDIS ignition. Warn 8274 winch with Gigglepin head
Who is online
Users browsing this forum: No registered users and 2 guests