Page 1 of 1
Coil Spacers
Posted: Wed Oct 25, 2006 10:17 am
by TASPAJ
Just wondering if anyone has seen coil spacers available to fit the LWB NH.
I have seen them to fit cruisers and pootrols but not the Paj.
I want around 30mm just the lift the back up a bit more. I brought new 2 inch progressive rate king springs about 3 years ago and they sagged quite a bit in 3 years. What I should have done is buy the heavy duty 2 inch lifted king springs, I think this would have been the better choice.
Cheers!
Posted: Wed Oct 25, 2006 5:58 pm
by Glennb
i DONT THINK YOU CAN GET COIL SPRING SPACERS FOR PAJEROS. IM NOT SURE ABOUT THE NH BUT FOR MY NJ I CAN FIT PATROL SPACERS IF I CUT 4-5MM OUT OF THE CENTER OF THE SPACER.
Posted: Wed Oct 25, 2006 6:15 pm
by 88pajero
A while ago I was using 30mm spacers from an 80 series. I have a nf though, but I think the springs are the same. All I had to do was make a slight groove where the spring seated.
Posted: Wed Oct 25, 2006 6:31 pm
by hudson44
Yeah i run 1" spacers on top of my 2" springs with no drama's. They were for a patrol, but as swbpajero said, you just have to take a small amount out of the centre so they sit up into the cradle!
Posted: Thu Oct 26, 2006 12:56 pm
by JOHNZ
Coil spacers for pajero $40 pr
cheers mate
Posted: Fri Oct 27, 2006 12:23 pm
by Alej Altuve
What kind of materials do you use for the coil spacers??? rubber?? aluminun?? steel??
Do they make noises???
Posted: Fri Oct 27, 2006 1:03 pm
by JOHNZ
Alej Altuve wrote:What kind of materials do you use for the coil spacers??? rubber?? aluminun?? steel??
Do they make noises???
Urethane
Posted: Mon Oct 30, 2006 12:14 pm
by TASPAJ
what kind of lift is this going to get me. 30mm 50mm?
Cheers!
Posted: Mon Oct 30, 2006 12:23 pm
by -Scott-
TASPAJ wrote:what kind of lift is this going to get me. 30mm 50mm?
Cheers!
It all depends on the thickness of the spacers.
Gut feel, anything taller than 20 or 30mm and you should get new springs.
Posted: Mon Oct 30, 2006 1:28 pm
by JOHNZ
TASPAJ wrote:what kind of lift is this going to get me. 30mm 50mm?
Cheers!
Coils spacers for paj 10mm,20mm,30mm.
cheers