Notice: We request that you don't just set up a new account at this time if you are a previous user.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.

Defender finding!!

Tech Talk for Rover owners.

Moderator: Micka

Forum rules
Post Reply
Posts: 18
Joined: Mon Aug 21, 2006 9:54 pm
Location: Sydney, Australia

Defender finding!!

Post by Robocop »

Guys

I was having a good look under my Defender on the weekend and noticed somthing I have never seen before. Being my first Rover some things are new to me.

I noticed on the front diff housing there appeared to be a flange joint near the swivle hubs, somewhat inbetween the radius arm mount and the swivle hub.

It occurred to be that this joint may allow a spring lift to be put into the vehicle then changing the position of this joint to correct the castor angle of the front wheels.

The vehicle is a 03 Defender extreme 110. Does anyone know if this is what it is meant for?

Cheers Rob.
Top
Posts: 3288
Joined: Sun Feb 02, 2003 10:15 pm
Location: Central West NSW

Contact:
Contact Slunnie

Post by Slunnie »

Its not, but its a pretty common modification for Defenders/Rangies/Disco's that are lifted beyond 2"
Cheers
Slunnie

Discovery TD5, Landy IIa V8 ute.
Top
Posts: 5803
Joined: Wed Feb 19, 2003 3:02 pm
Location: Brisbane

Post by ISUZUROVER »

Unlike toyotas and nissans, most Land Rovers have removeable swivel balls - which I assume is the flange you are talking about. You can use this to correct castor after a spring lift, but you need to slot the bolt holes.
_____________________________________________________________
RUFF wrote:Beally STFU Your becoming a real PITA.
Top
Posts: 18
Joined: Mon Aug 21, 2006 9:54 pm
Location: Sydney, Australia

Post by Robocop »

Does this mean that I have to drill new holes or just line up the next holes?

Rob
Top
Posts: 369
Joined: Tue Sep 06, 2005 6:16 pm
Location: Melbourne

Post by RangingRover »

You have to get new holes drilled, as they are not evenly spaced (probably so that people can't accidentally put them on a bolthole out)
84 Rangie, 3 inch spring lift, 2 inch body, Megasquirted 4.6, R380, rear Maxi, 34x11.5 JT2s. Simex FM installed.
Top
Posts: 3064
Joined: Sun Jun 12, 2005 11:00 pm
Location: Yinnar South, Vic

Contact:
Contact cloughy

Post by cloughy »

RangingRover wrote:You have to get new holes drilled, as they are not evenly spaced (probably so that people can't accidentally put them on a bolthole out)
Only on later rovers, early ones are evenly spaced ;)
Wanted: Car trailer or beaver tail truck, let me know what you got
Top
Post Reply

Return to “Rover”

Who is online

Users browsing this forum: No registered users and 23 guests