Outer Limits 4x4 Board

Hi there chums I have developed a very small "crack" about 5 mm long in my power steering input hose that leaks when I turn :( Its on my buggy and I was thinking maybe I could put on a good dob of rubber cement and a descent patch made from old tube or someting then a hose clamp or two.....whatcha reckon?

i reckon just get a new one there not that expensive

for hastle of unreliability as well if you patch it who knows when it will just bust open

Yeah just rip it off and take it to pirtek or enzed, they'll be able to fix you up

x3

A little leak is likely to tear into a big leak when you least want it to.
Get it replaced proberly.
In a pinch there is a tape called "Extreem tape" that is a self amalgamating tape that is strong as that could work but I would only do that in an emergency when you couldnt get to a hose place.

thanx