Page 1 of 1
spring measurements for gq
Posted: Tue Nov 07, 2006 12:56 pm
by mattlux
Does anyone know the hub to guard mearsurement for gqs on standard or lifted?
Can anyone tell me how far to extend the rear lower arms on a shorty to stop 35s rubbing on plastic trim?
Posted: Tue Nov 07, 2006 1:54 pm
by rvh96
dont extend rear arms tyres will only rub on the rear of the arch extending arms will only make it worse. 5 inch lift will do the trick with rubing only on full compression
Posted: Tue Nov 07, 2006 3:08 pm
by badger
youshouldextend the rear arms if you go for a big lift as it will correct your rear pinnion angle. but it will not stop you hitting the gaurds. my truck runs 35's with a 6 inch lift and a rear quater chop and it hits tyre all the way around the gaurd 2 inches before the bumpstops.
the only way to make big tyres fit a gq wagon or shorty is to chop the gaurds or extend your bump stops