Outer Limits 4x4 Board

As in the pic i have managed to stuff the rear locker diagphram thing, i have tried to remove it but with no luck, can they be removed and replaced? They look as though they are pressed in there. I got the thing rotating but it doesnt see to be on a thread.

I am able to get annother one off a mate whos locker gave up so would rather replace it than chuck in an ARB.

Sorry about the bad quality pic.

I think you need to remove the diff center first to disengage it from the slot in the side-gear locking dog. After that, you should be able to get it out.

Nick

make sure you fab a beefy bashplate when you put it back in.
Jes

jessie928 wrote:make sure you fab a beefy bashplate when you put it back in.
Jes

Make that 2.. I need one

dibs on number 3

You have to take the centre out and then dissconnect the engagement fork then there is a nut on the end of the actuator.

Thanks guys, decided to chuck an ARB in it will keep the factory locker as a spare for our other safari as i cant pull my mates diff apart to get his one at the moment.

Ill definatly be building up a guard to prootect the good one.