Page 1 of 1
Torsion Bars
Posted: Fri Nov 10, 2006 11:27 am
by luv4x4
I am replacing the torsion bars in the front of my 4runner. Does anyone have any advice on removing the old ones and installing the new bars. The 4runner is a 95 2.8 Diesel.
Cheers
Paul
Posted: Sat Nov 11, 2006 7:22 am
by rixrunner
I am going to do the same soon so I guess I will find out.
Should be relatively simple, just make sure you spray heaps of WD40 or similar on the bolts before you start and count the winds of the adjustment bolts to get both sides the same when refitting. Do this on a flat surface to match the height to the back and finish with a wheel alignment.
Ricky
Re: Torsion Bars
Posted: Sat Nov 11, 2006 3:15 pm
by luv4x4
luv4x4 wrote:I am replacing the torsion bars in the front of my 4runner. Does anyone have any advice on removing the old ones and installing the new bars. The 4runner is a 95 2.8 Diesel.
Cheers
Paul
Put the torsion bars in today. Turned out to be quite easy
Posted: Sun Nov 12, 2006 4:00 pm
by Struth
Put the torsion bars in today. Turned out to be quite easy
Info please.
Cheers