Page 1 of 1

gearbox oil level

Posted: Sun Nov 12, 2006 11:57 am
by roaroffroad
aye guys,
i changed the oil in my g,box last night (with castrol vmx-m and lucas heavey duty oil stabilizer) and noticed that alot more then 2.2 litres of oil came out. thinking i might have a leak from t,case?. i havent cracked the case yet to have a look if its low.

i was also thinking who ever done the last oil change put in too much, as i have been told in the past to 'just top it up till the oil comes out the filler hole'. but i put in bout 2.6 litres and its still not to the top.

any ideas?

p.s. i still cant find a place in adelaide that does body mods i.e. ute chops.
i asked my panel beater but he had nfi. if anyone comes to mind let me know.
cheers :cool:

Posted: Tue Nov 14, 2006 2:51 am
by Alej Altuve
Fill the gearbox until the oil comes out of the filler hole, it's going to use about 2.8 liters. Check out this review about Lucas oil stabilizer

http://www.bobistheoilguy.com/images/lucas/lucas.htm


P.S. I don't live in Australia

Posted: Tue Nov 14, 2006 8:08 pm
by roaroffroad
Alej. Interesting test, ill have to think twice about putting lucas in next time. I have noticed slightly smoother gear changes though, especially when cold.

cheers ;)

Posted: Thu Nov 16, 2006 3:14 pm
by roaroffroad
just an update on the lucas additive.

gearbox - better, smoother changes - will use again

engine - worse. made lifters noisey as hell - never again

Posted: Sat Nov 18, 2006 2:25 pm
by Alej Altuve
Hey Roar. Its good to know about your gearbox doing well... Today I change my gear oil with Motul Motyl Gear 75W90 syntetic blend. It is amazing how it works now, from the first moment, it's really smooth. I will never put Shell again!!! For the engine I put Valvoline VR1 15W40 SL is the fastest to shut my lifters in the morning